Once the workpiece has been flattened and edged on a surface planer, it is planed to the thickness desired on the thickness planer. Unlike a surface planer, the thickness of a thickness planer is located above the planing table and the piece is no longer hand-fed but mechanically by feed rollers. The feed rollers are driven either by a separate motor about 1 kW or by a gearbox that receives its engine power from the cutter block.

Machines that produce wood dust should be equipped with dust collection systems. If the exhaust system is unsuitable for removing wood dust, the operator may need to wear a dust respirator. The International Agency for Research on Cancer IARC has now determined that there is "enough evidence in humans of the carcinogenic nature of wood dust" and that " wood dust is carcinogenic to humans group 1.

The automatic installation of wood dust and shaving equipment on saws, planers, molders and so on, which transport the waste into storage silos in waiting for their elimination or recovery. No smoking in the workplace and eliminating all sources of ignition eg open flames. Ensure regular cleaning procedures for dust and chips deposited. Proper maintenance of machines to avoid phenomena such as overheating. of bearingsĀ·

The first and main question that would be asked by the market or you should ask yourself is what is different which makes the customers fall apart? place to you for purchase. There must be complete information that needs to be upgraded to the aspect of understanding what customers want. So first the decision to go online selling could be a good idea to get to the market what you have in stock.

If you are one of them, try the ones I mentioned before. One of the best ways to grow a carpentry business is actually woodworking fairs. These fairs usually attract a lot of customers as well as craftsmen. You can set up a booth to present and sell your product. You can exchange ideas and learn a lot about craftsmanship by talking to other woodworkers. Attending these fairs is an absolute must. Visit carpentry sites or read magazines to know the dates of these fairs. Promoting carpentry projects across the local community is always interesting and fun. This will allow customers to notice you and your job much more easily.

Votes 81

Rating: 5 out of 5

Comments are closed.

Post Navigation